How to Pull Up Vinyl Plank Flooring

Are you a DIY-er? Ready to take on the challenge of installing new floors in your home? Installing vinyl plank flooring is an easy task that can give your space a whole new look. Whether you’re replacing existing floors or attempting to save money and time by doing it yourself, this guide will help you through the process from start to finish.

How to Pull Up Vinyl Plank Flooring

Learn how to pull up vinyl plank flooring, as well as get tips on what types of tools and supplies are needed for each step along the way. So let’s dive into it – read on for all of our expert advice!

Tools and Materials You Will Need to Pull Up Vinyl Plank Flooring

  1. Putty knife
  2. Pry bar
  3. Hammer
  4. Safety glasses
  5. Work gloves
  6. Vacuum cleaner or broom and dustpan

Step-by-step Guidelines on How to Pull Up Vinyl Plank Flooring

Step 1: Remove Furniture and Decorations

It’s important to get rid of everything that might be in the way during the installation process. This includes furniture, wall decorations, rugs, and anything else that could stand between you and the floor. Take this time to vacuum any dust or debris off the existing floors so you have a clean surface to work with.

Step 2: Start at One Corner of the Room

Start in one corner of the room and begin prying up the vinyl planks using a putty knife. If you have trouble removing them, use a pry bar or hammer to gently loosen them from the floor. Take care not to damage your existing floors while doing so. Starting in one corner will make it easier to keep the planks in order and avoid any confusion when putting the new ones down.

Hammer to Gently Loosen Them From the Floor

Step 3: Pull Up the Planks

Once you’ve loosened the pieces with a putty knife, use your hands to carefully pull up each plank from the floor. Depending on how they’re installed, you may be able to remove entire sections at a time or just one piece at a time. Be mindful of where all of the nails and screws are located so you can properly dispose of them.

Step 4: Clean Up the Area

Once all of the planks have been removed, use a vacuum or broom and dustpan to clear out any remaining debris or nails from the subfloor. Doing this will give you an even surface to work with when installing new planks. While cleaning the area, take this time to inspect the floor for any damage that may need repair before you begin installing your new vinyl.

Step 5: Prepare the Subfloor

Now that the subfloor is cleared of all debris, it’s important to make sure it is level and smooth before beginning installation. Check for any bumps or dips in the surface, as these will prevent the vinyl planks from lying flat. You may need to use a putty knife or sandpaper to even out any bumps and dips you find.

Step 6: Begin Installing Your New Planks

Now that your subfloor is ready, it’s time to start installing the new vinyl planks. Place each piece in the groove of the previous one and press down firmly to ensure they are connected securely. Make sure that all of the pieces fit together snugly without any gaps before moving on to the next piece.

Subfloor is Ready

Step 7: Trim Unwanted Planks

When you get to the edges of your room, you may need to trim a few planks so they can fit correctly in the space. Using a utility knife, trim the planks to size and press them into place. Be sure to measure twice before cutting so you don’t end up with pieces that are too small or pieces that don’t fit in the space properly.

Step 8: Finishing Touches

Once all of your vinyl planks have been installed, it’s time for the finishing touches. If your vinyl planks have pre-attached edging, use a hammer to secure them into place. You may also need to add extra adhesive around the edges of the room for additional support. Finally, use a vacuum or broom to remove any dust or debris from the surface of the planks so that they look perfect when you’re done!

Following these steps will help you successfully pull up vinyl plank flooring and give your home a fresh, new look. Be sure to take your time and measure twice before cutting – this will help ensure that you get the perfect fit for each piece of vinyl plank. Good luck with your installation!

Additional Tips and Tricks to Pull Up Vinyl Plank Flooring

1. If your vinyl flooring has been installed for an extended period of time, it may be difficult to remove the planks without damaging them. In this case, you can use a heat gun to soften the adhesive underneath and make it easier to remove.

2. Make sure that you’re wearing protective gear when using any tools or equipment while pulling up vinyl plank flooring.

Wearing Protective Gear When Using Any Tools

3. If you’re having difficulty pulling up individual planks, try using a pry bar or chisel to help you loosen them from the adhesive and get a better grip.

4. Some types of vinyl plank flooring are designed with interlocking edges, making it easier to remove larger areas at once instead of tackling one plank at a time.

5. As you go along, it’s important to take breaks and check in with yourself if the task is becoming too strenuous. It’s better to take breaks than risk an injury while trying to pull up your flooring.

6. Once all of the vinyl planks have been removed, use a vacuum cleaner or broom to sweep away any residual adhesive that may remain on the subfloor.

7. It’s important to inspect the subfloor for any signs of damage before laying down new flooring, as this may affect how well your new floor will stay in place. Make sure that any issues are fixed before moving on with the installation process.

8. Before installing new vinyl plank flooring, make sure to thoroughly clean and dry the subfloor. This will help ensure that the adhesive sticks properly and your flooring stays in place for years to come.

9. When laying down new vinyl plank flooring, it’s important to follow the manufacturer’s instructions regarding how to best install them in order to get a good, long-lasting result.

10. Installing vinyl plank flooring is a relatively easy task if you take the time to do it properly and can be an affordable way to give any room in your home a fresh look.

Following these tips and tricks will help you get the most out of your flooring installation project. Good luck!

Plank Flooring is a Relatively Easy Task

Frequently Asked Questions

How Do I Remove Vinyl Plank Flooring?

Removing vinyl plank flooring depends on the type of installation. For glue-down installations, use a razor blade to score the planks and pry them up using a putty knife. Floating installations may be removed by using a wide chisel or stiff putty knife to get under the planks and pry them up. For floating installations, you may need to use a heat gun to loosen the adhesive from the flooring underneath.

How Do I Maintain Vinyl Plank Flooring?

Maintaining vinyl plank flooring is relatively simple and straightforward. Vacuum or sweep regularly to remove dirt and grit that could scratch the surface of the planks. Mop regularly with a damp mop and appropriate floor cleaner for the type of vinyl plank flooring installed.

Make sure to use minimal water when mopping to avoid damaging the flooring or creating warping due to too much moisture. Additionally, consider using furniture protectors or mats beneath furniture legs or heavy items that could scratch the surface of your vinyl plank flooring.

How Do I Repair Vinyl Plank Flooring?

If you have a damaged or torn plank, replacement is the best option. It is always best to find an exact match for the plank being replaced in terms of color and size. If this is not possible, consider replacing all of the flooring that may be affected by the damage in order to maintain a uniform look.

In the event of minor scratches or scuffs, use a repair kit specifically designed for vinyl plank flooring. These typically contain a wax crayon and/or putty that can be used to fill in the damage and restore the look of your flooring.

How Do I Clean Vinyl Plank Flooring?

Cleaning vinyl plank flooring is easy and only requires a minimal amount of effort. Sweep or vacuum regularly to remove dirt and debris from the surface of the planks. Mop regularly with a damp mop using an appropriate floor cleaner for your particular type of flooring.

Cleaning Vinyl Plank Flooring is Easy

Make sure to use minimal water when mopping as excessive moisture can cause warping in the planks or damage to the adhesive. Additionally, consider using furniture protectors or mats beneath furniture legs or heavy items that could scratch the surface of your vinyl plank flooring.

Can Vinyl Plank Flooring Be Installed In High-Traffic Areas?

Yes! Vinyl plank flooring is a great option for high-traffic areas because it is very durable and easy to maintain. It is also scratch-resistant and water-resistant, making it a great choice for areas with a lot of foot traffic or moisture. However, it is important to note that vinyl plank flooring should not be installed in areas where there will be direct sunlight as this can cause fading over time.

Additionally, extra care should be taken when using furniture protectors or mats beneath furniture legs to avoid scratching the flooring.


Pulling up your vinyl plank flooring can be a daunting task, but it does not have to be. With the right tools and information, such as the steps outlined in this blog post, you can easily and safely complete this project on your own. Taking the time to research how-to tutorials like this one can help ensure that you will do the job quickly, accurately, and safely.

Whether you are looking to makeover an entire room in need of a facelift or just need to fix a damaged plank or two, knowing how to pull up vinyl plank flooring is an invaluable skill.

After all, accidents happen—so why not learn how to take care of them yourself? Armed with the know-how of pulling up your vinyl planks correctly and efficiently, tasks like these won’t ever have to bring anxiety or stress into your life again! Now that you’ve been given the tools necessary for success – go ahead and try it out for yourself!

Photo of author

Jennifer Branett

Leave a Comment