How to Paint a Fireplace Door

Are you looking to spruce up your living room with a fresh coat of paint? Painting your fireplace door is an inexpensive and easy way to give your home a facelift.

How to Paint a Fireplace Door

From the color selection process to protecting the newly painted surface, taking on this project yourself can be quicker and more cost-effective than professional and store-bought alternatives. Read our step-by-step guide if you’re ready to tackle painting your fireplace door!

Nothing can beat the aesthetic of a freshly painted fireplace door, whether it’s a modern or traditional look! Painting these doors is easy — all you need are the right tools and supplies. Whether you’re looking for helpful tips on how to paint a fireplace door or are just starting, this blog post will help ensure your project goes as smoothly as possible.

What Will You Need?

Before you start painting your fireplace door, you will need the followings:

1. High-quality Paint: Make sure to select high-quality paint that can withstand the heat from your fireplace.

2. Primer: Use a primer before you begin painting so that the paint adheres properly to the door. This will help ensure a smooth finish and even coverage.

3. Paintbrush or Roller: When painting doors, a brush or roller is usually the best way to go. Select one with soft bristles that won’t leave any streaks behind.

4. Drop Cloth: Lay down a drop cloth before you begin painting so that any paint splatters are contained and easily cleaned up afterward.

5. Sandpaper: If your fireplace door has any scratches or imperfections, use sandpaper to smooth them out before you start painting.

6. Safety Goggles and Mask: Protect yourself from potential fumes by wearing safety goggles and a mask while working on your project.

7. Paint stripper (optional): If you’re looking to remove old paint from the door, then you may need a paint stripper as well.

Once you have all of these supplies ready, you’re good to go!

10 Easy Steps on How to Paint a Fireplace Door

Follow these steps to paint your fireplace door successfully:

Step 1. Clean and Prep the Surface: 

Start by cleaning the door with a damp cloth to remove any accumulated dirt and dust over time. Once it’s dry, use sandpaper to smooth out any scratches or imperfections. If you want to remove the old paint, use a paint stripper or heat gun.

Cleaning the Door With a Damp Cloth

Step 2. Apply Primer: 

Apply a coat of primer to the door using a brush or roller, covering every surface completely. Allow it to dry for at least an hour before moving to step 3. Try to use a primer the same color as your paint so you don’t have any odd-looking streaks.

Step 3. Paint: 

Once the primer has dried, you can paint your fireplace door with your selected color. Make sure you use even strokes and paint in one direction until the entire surface is covered. Another good tip is to start from the top and work your way down. You may need to apply multiple coats for a more even finish — just make sure to wait until each coat has completely dried before applying the next one.

Step 4. Let It Dry: 

Allow the paint to dry overnight before continuing with further steps. As tempting as it may be, do not touch the door until it is completely dry. Remember to remove the drop cloth and clean up any paint splatters.

Step 5. Seal Your Work: 

To protect your new finish, apply two coats of sealer or varnish after the paint has dried completely (at least 8 hours). There are a variety of sealers and varnishes to choose from, so make sure to select one that is appropriate for your fireplace door. The best option is to use a water-based sealer or varnish, as it is less likely to yellow with age and can be easily cleaned.

Step 6. Clean Up: 

Remove any excess paint or primer with a damp cloth, and then responsibly dispose of the drop cloth. You can also use steel wool to remove drips or uneven patches. If you’re using a water-based sealer or varnish, clean the brush thoroughly.

Step 7. Re-install Fireplace Door: 

Carefully re-install your fireplace door, ensuring all screws are tightened securely, and no paint is chipped off during the process. Be careful not to move the door too much, as this could cause the paint to crack or chip off. Because this area gets quite hot, use a high-temperature paint and primer to ensure the finish lasts.

Carefully Re-install Your Fireplace Door

Step 8. Let It Cure: 

Allow your newly painted fireplace door to cure for at least 24 hours before using it again. You can use a fan to help the curing process if you’d like. Another good tip is to apply a top coat of sealer or varnish every few months to keep the finish looking its best.

Step 9. Test Your Work:

Before using your fireplace door, open and close it several times to ensure everything is working properly and there are no chips or other damage to the finish. If necessary, touch up any areas that may have been damaged. Check the door periodically and reapply sealant or varnish as needed.

Step 10. Enjoy: 

Sit back and admire your handiwork! You’ve just successfully painted your fireplace door—you should be proud of yourself! Remember to take extra precautions when using your fireplace door to ensure the safety of your home and family.

By following these steps, you can successfully paint your own fireplace door. It’s an inexpensive and easy way to give your home a facelift! Enjoy the beautiful results of your hard work!

5 Additional Tips and Tricks

  1. If you’re painting an iron fireplace door, use a metal primer to ensure that the paint adheres properly.
  2. Have plenty of rags on hand for wiping away excess paint and cleaning up spills.
  3. Try using painter’s tape to mask off areas you don’t want painted.
  4. If you need more confidence with a brush or sprayer, consider using a roller for your larger, flatter surfaces.
  5. Make sure to wait at least 48 hours after painting before opening or closing the door so the paint can fully cure and be set up correctly.
Using Painter's Tape

With these tips, you can give your fireplace door a stunning new look!

5 Things You Should Avoid

  1. Don’t rush the job. Take your time and ensure you get good, even paint coverage.
  2. Avoid using a brush if possible, as it can leave visible brush strokes in the paint finish.
  3. Never leave your fireplace door open while painting it, as this will lead to uneven drying and patchy results.
  4. Never apply too much paint at once; instead, apply multiple thin coats for best results.
  5. Remember to wear protective gear to avoid inhaling harmful fumes from the paint or primer!

By following these tips and tricks, you can give your fireplace door a professional-looking finish that will stand out! So why not take on this project and give your fireplace the makeover it deserves?

Do You Need Heat Resistant Paint for Fireplace?

Yes, you should use heat-resistant paint or primer for your fireplace door. This will ensure the paint doesn’t blister or peel off due to the high temperatures. Be sure to check the paint carefully can label for information about its heat resistance before purchasing.

Additionally, if you’re painting a metal fireplace door, use a metal primer before applying the topcoat of paint. This will create an even better bond between the two surfaces and ensure your finished look remains beautiful for years.

With these tips, you can give your fireplace door the makeover it deserves!

Which Paint is Best for Heat Resistant?

Silicone-based paints are the best choice for heat resistance. These paints are specially designed to withstand temperatures up to 400 degrees Fahrenheit, making them perfect for fireplaces and other high-heat areas. These paints also offer excellent moisture protection and won’t easily crack or peel away over time.

If you’re looking for a more affordable alternative, consider using an epoxy-based paint instead. These paints can handle temperatures up to 250 degrees Fahrenheit and provide good water resistance. Make sure that whatever paint you choose is rated for use on your type of fireplace door material.

Use on Your Type of Fireplace Door

No matter what kind of paint you ultimately decide to use, always make sure to apply at least two coats of paint for the best results. This will ensure your finished look remains vibrant and beautiful for many years!


How to paint a fireplace door is no easy feat, but with the right supplies; proper measurements; and dedication to the project, you can be proud of a job well done! After putting in all that hard work, you don’t want your masterpiece ruined by careless use. Be cautious when opening and closing your newly painted door – paint can flake off easily if not used correctly.

Additionally, consider using non-flammable finishes on your door – this will help reduce the risk of fire breaking out if flames escape the fireplace hearth. Lastly, take frequent breaks throughout your painting process; if you get overworked or stay far too long in one particular spot on the door, this will show through in your finished product.

By considering these precautions and allowing yourself enough time for painting and drying periods, you won’t have any issues achieving a beautiful masterpiece that you can be proud of!

Photo of author

Jennifer Branett

Leave a Comment