How to Epoxy Wood Floor

Epoxy coating for wood floors is a versatile and durable solution that can enhance the appearance and longevity of your wooden flooring. Epoxy provides a protective layer that not only shields the wood from wear and tear but also adds a glossy, smooth finish that can truly transform the look of any space.

How to Epoxy Wood Floor

Whether you have a hardwood floor that needs rejuvenation or want to enhance the natural beauty of the wood grain, applying epoxy is a process that requires careful attention and precision.

In this comprehensive guide, we will delve into the step-by-step process of how to epoxy wood floor, from surface preparation and choosing the right epoxy to the actual application and finishing touches.

By following these steps and using the appropriate techniques, you can achieve a stunning, long-lasting epoxy-coated wood floor that brings elegance and resilience to your home or business.

Benefits of Using Epoxy on Wood Floors

Epoxy Floors Require Very Little Maintenanc

Epoxy is a great choice for covering wood floors. It offers many advantages over other types of flooring, including:

  1. Durability – Epoxy is extremely durable and resistant to scratches, dents, and other wear-and-tear damage. It’s also waterproof, making it suitable for any room in the house or commercial building.
  2. Low Maintenance – Epoxy floors require very little maintenance to keep clean and looking like new. A simple sweep or mop will do the trick, with no need for special cleaners or waxes.
  3. Variety of Colors – Epoxy is available in a wide variety of colors, so you can find something that suits your style and fits your décor.
  4. Cost-Effective – Epoxy floors are relatively inexpensive compared to other types of flooring, so it’s a great option if you’re on a budget.
  5. Easy Installation – Epoxy can be applied in just one day and requires minimal preparation before installation.
  6. Resistant to Chemicals – Epoxy is resistant to many chemicals, making it ideal for industrial areas and other places where harsh chemicals may be used.
  7. Safe – Epoxy floors are slip-resistant and fireproof, making them a safe choice for any home or workplace.

Epoxy is also easy to repair if any damage does occur. Simply sand down the affected area and reapply another coat of epoxy. This makes it a great choice for high-traffic areas that may need additional wear and tear protection. All in all, epoxy is an excellent option for any wood floor, offering long-lasting durability and easy maintenance at a fraction of the cost of other types of flooring.

Choosing the Right Epoxy

Different Woods Require Different Types of Glue

When deciding what kind of epoxy to use on your wooden floor, it is important to consider the type of wood you have. Different woods require different types of glue and there are a number of factors that should be taken into consideration before making your decision. For instance, softer woods like pine need an epoxy with a lower viscosity so it can penetrate more deeply into the grain of the wood.

Harder woods like oak require a higher viscosity glue so that it is able to adhere better. Additionally, you should also consider if your floor needs to be waterproofed and if there are any special requirements for the type of finish you want on your floor.

10 Steps How to Epoxy Wood Floor

1. Prepare the Subfloor:

The first step in installing an epoxy wood floor is to prepare the subfloor. This includes cleaning the surface, removing any debris or dirt, and ensuring that it is level and free of cracks or other damage.

Before you begin applying the epoxy, use a vacuum cleaner to remove any dust and dirt that may be present. Then, use a damp mop to thoroughly clean the surface. When it is completely dry, check for any signs of cracks or damage and repair these areas as necessary.

2. Apply Primer:

Prepared, a Primer Should Be Applied to Ensure That the Epoxy

Once the subfloor is prepared, a primer should be applied to ensure that the epoxy adheres properly. When applying the primer, it is important to use a brush or roller and to apply it evenly across the entire surface.

Once the primer is completely dry, a sealant should be applied to further ensure adherence. This will help to protect the epoxy from any moisture or other elements that can cause it to fail.

3. Mix Epoxy:

Once the primer has dried, it’s time to mix the epoxy according to the manufacturer’s instructions. This typically involves combining two parts of resin with one part of hardener in a bucket and stirring until they are thoroughly combined. Once complete, the epoxy can be poured onto the floor in smaller sections and spread across the surface using a notched trowel.

4. Apply Epoxy:

 It Can Be Applied Using a Roller or Brush

After mixing the epoxy, it can be applied using a roller or brush. It’s important to spread it evenly across the surface and make sure that all areas are covered with an even layer of epoxy. Make sure to pay special attention to any cracks or dents in the wood floor that need to be filled. It can take up to two days for the epoxy to cure, so make sure you don’t walk on it during this time.

5. Allow Epoxy to Cure:

Once all areas have been covered with epoxy, it needs to be allowed to cure for at least 24 hours before any additional work can be done on top of it. During this time, make sure that no one walks on the floor as this could cause damage or imperfections in your finished product.

After 24 hours, you should check the epoxy to make sure that it is fully cured. If it has not yet been set, leave it for a few more hours before proceeding with the next step.

6. Sand Floor:

Sanding Down Any Imperfections

After allowing for adequate curing time, you can begin sanding down any imperfections in your floor with a fine-grit sandpaper or sander. Make sure that you don’t sand too much as this could damage your floor further and result in an uneven finish when you apply additional layers of epoxy later on.

However, you should also be sure to sand enough so that the wood is completely smooth and ready for the epoxy layer.

7. Vacuum Up Dust:

Use a Vacuum Cleaner or Dustpan

Once you have finished sanding down any imperfections on your floor, use a vacuum cleaner or dustpan and brush to remove any dust particles from your work area. This will help ensure that there are no particles left behind, which could affect how well your next layer of epoxy bonds with the subfloor beneath it. You may want to wear a respirator mask while you do this as the dust can be harmful when inhaled.

8. Apply Second Layer of Epoxy :

Now that all dust particles have been removed from your work area, you can begin applying a second layer of epoxy. As before, make sure that you spread this layer evenly across your entire surface. Allow this second layer of epoxy to cure for at least 24 hours before proceeding any further.

9. Finish Floor :

After allowing for adequate curing time, you can now finish off your floor by applying either a sealant or wax coating over top. This will help protect against scratches and wear and tear while also giving your floor a glossy finish which will make it look great for years to come! When selecting a product, be sure to read up on the manufacturer’s instructions and recommendations for use.

Depending on which product you select, you may need to apply multiple coats of sealant or wax in order to achieve full coverage. Additionally, some types of products will need regular re-application every few months in order to keep your floor protected.

10. Clean Up Work Area :

Finally, once everything has been completed, take some time to clean up any messes made during installation, such as spilled glue or excess sawdust. Doing so will help keep your workspace looking neat and tidy while also protecting against future accidents caused by slippery surfaces!

Additionally, it is recommended to seal the edges of the floor with epoxy or caulk in order to make sure that there are no gaps between planks and ensure that the overall finish looks uniform. Doing these steps will create a lasting floor that you can enjoy for many years!

Things to Consider Making When Epoxy Wood Floor

  1. Temperature: Epoxy is a temperature-sensitive material, so you need to make sure the area where the epoxy will be applied is at an optimal temperature range during the entire installation process. If it’s too cold or hot, it won’t set properly and can cause issues later on.
  2. Floors: The type of flooring you’re working with will have a direct effect on the success of your epoxy installation. Take into account the type of wood, its age and condition, as well as any potential moisture or other environmental conditions that might be present.
  3. Adhesive: Make sure you are using an adhesive that is compatible with both the floor surface and epoxy material. This can help to ensure a better bond between the two, and will also ensure that your epoxy flooring lasts longer.
  4. Prep: Make sure you have adequately prepped the surface of the wood prior to applying the epoxy. This includes sanding any old sealant or paint, cleaning up any dirt or debris, and allowing for a completely dry surface before beginning the installation process.
  5. Finishes: Consider the type of finish you want for your epoxy floor and choose one that is both aesthetically pleasing and durable enough to withstand the wear and tear of everyday life. Epoxy comes in a variety of colors and textures, so you can easily customize the look of your floors to fit with any design aesthetic.


Epoxying your wood floor is an easy DIY process that requires little effort but offers a big reward—a beautiful, shiny and waterproof finish. Once you’ve mixed the two epoxy components into a paste-like consistency, all you need to do is spread it over the surface of your wood floor and wipe off any excess.

You’ll be amazed at how strong and long-lasting this finish is, and what a difference it will make to the overall look of your floor. Every time you walk on your nicely finished wood floor, you’ll have achieved something special because of the hard work and care that went into it.

Once you’ve enjoyed the satisfaction of completing such a project yourself with great success, why not share your knowledge? Explain to others how to epoxy wood floor, as now it is something very achievable — no magic necessary!

Photo of author

Jennifer Branett

Leave a Comment