Do you want to bring warmth and light into your living room or backyard with a cozy fire? With Duraflame Fireplace products, it’s easy to get a reliable fireplace going in no time. In this post, we’ll teach you everything you need to know about how to start a fire in a fireplace with duraflame or starter cubes and give helpful tips for maintaining the perfect flame every time.
Whether you’re new to enjoying fires indoors or an experienced outdoor adventurer who loves camping and gathering around the campfire, this guide can help ensure that your fires are as safe as they are enjoyable!
12 Step-by-step Guidelines on How to Start a Fire in a Fireplace With Duraflame
Step 1: Gather the Materials
To get started, you will need to have Duraflame Fireplace products, such as fire starters or cubes. You’ll also want to have crumpled-up newspaper or paper towels and kindling, such as small twigs, sticks, and logs. It’s also helpful to have a steel fire poker, a bucket of water, and protective gloves and eyewear. This will help protect you from the sparks and embers your fire might create.
Step 2: Prepare the Fireplace
Make sure that the fireplace is clean and clear of any debris. Remove ash from the previous fires in order to create space for your new fire. But be careful! Ash can remain hot for hours after a fire has been put out.
If you have a safety screen, make sure to close it in order to keep sparks from flying out. This is especially important if you have children or pets in the house. If you don’t have a safety screen, consider putting one in place.
Step 3: Arrange the Logs
Arrange your logs in a log cabin formation with a space left in the middle for airflow. Place one Duraflame cube near the center of this arrangement. Then place two more cubes on either side of it, making sure they are all touching each other. This will help ensure even heat distribution throughout your fireplace. It is also important to make sure that the cubes are not too close together, as this could cause them to overheat.
Step 4: Add the Kindling
Now it’s time to add your kindling to the fireplace. Place small twigs and sticks around the cubes, making sure that they are in contact with the Duraflame products. It’s important to leave some space between the cubes and the kindling for optimal airflow.
This will help you get the fire going quickly and evenly. It’s also important to make sure that the kindling is not too thick, as this could smother the fire. But don’t skimp on the kindling either, as you’ll need it for fuel.
Step 5: Light Your Fire
Using a long-handled match or lighter, light the two cubes on either side of your arrangement. Let them burn for a few minutes until they are fully ignited and spreading flames to other logs.
It’s important to use a long-handled match or lighter so that you don’t get too close to the flames and risk burning yourself. But if you do find yourself too close to the fire, remember not to panic! Step back slowly and use the fire poker or bucket of water near the fireplace to extinguish any sparks that are coming out.
Step 6: Add More Fuel
Once your fire is burning, you can add more fuel by slowly adding medium sized pieces of wood one at a time. Make sure not to overload the fireplace as this could cause smoke buildup and put out your fire!
It’s also important to make sure that your logs are spread evenly throughout the fireplace and not stacked too close together. This will help ensure that you get an even burn throughout the night. This is also a good time to add newspaper or paper towels for added fuel.
Step 7: Monitor the Fire
Now that your fire is lit, you should keep an eye on it to make sure it doesn’t get out of control. Pay attention to the flame and smoke production as too much of either can be dangerous.
It’s also important to use the fire poker occasionally to move around and separate logs that are too close together. This will help promote even burning and keep your fire under control. This is also the time to add more kindling as needed.
Step 8: Add Newspaper or Paper Towels
If you find that your fire isn’t burning well, you may need to add some newspaper or paper towels as kindling. This will help create more heat and keep the logs burning. But be careful not to add too much as this could smother the fire. It’s best to add one or two pieces at a time and slowly increase the amount as needed.
If you find that the newspaper is getting too close to the flames, use the fire poker or bucket of water to extinguish any sparks.
Step 9: Maintain Heat Levels
As your fire burns, you may need to adjust the airflow in order to maintain a consistent heat level. You can do this by opening or closing the flue at the top of the fireplace. If there is too much smoke, you can close the flue slightly and if there isn’t enough heat, open it.
It’s important to maintain the right temperature in order to keep your fire burning and prevent any potential hazards. Although these adjustments may seem small, they can make a big difference in the safety and efficiency of your fire.
Step 10: Add More Fuel
Continue to add fuel as needed in order to maintain a steady flame. Make sure not to overload the fireplace or your fire will burn out quickly. However, it is important to keep the fire going for long enough in order to create hot coals that are more efficient at burning wood and keeping the fire going for longer. But be careful not to add too much fuel at once as this could cause smoke buildup and put out your fire.
Step 11: Let It Burn
Once your fire is burning steadily, you can let it do its thing! Be sure to keep an eye on it periodically and add more fuel as necessary. If at any point you find that the fire is getting out of control, remember to use the bucket of water or fire poker to extinguish any sparks and embers that may be coming out of it.
But otherwise, sit back and enjoy the warmth of your Duraflame fire! Always remember to practice fire safety and never leave a burning fireplace unattended.
Step 12: Extinguish the Fire
When you’re ready to put out the fire, make sure that all of the logs are burned down completely. Then use a poker or shovel to spread out any remaining embers and ashes. Cover the fireplace with a fire screen or door to ensure that no sparks fly out of the fireplace.
Finally, use your poker or shovel to cover any remaining embers with a layer of sand. It’s important to make sure the fire is completely extinguished before leaving the room. Always remember to practice fire safety!
Now you know how to start a fire in a fireplace with Duraflame! Keep these tips in mind next time you want to enjoy an evening by the fire. With Duraflame Fireplace products, it’s easy to get a reliable flame going quickly and safely every single time! Enjoy your cozy fires and stay warm this winter!
Frequently Asked Questions
Q: How Much Duraflame Do I Need for My Fire?
A: The amount of Duraflame you need depends on the size of your fireplace. We recommend using two cubes per log for smaller fireplaces and three cubes for larger ones.
Q: Is It Safe to Have a Fire in My Fireplace?
A: Yes, as long as you follow the instructions outlined in this guide and pay close attention to smoke levels, it is safe to have a fire in your fireplace. Be sure to always keep an eye on the flame!
Q: How Often Should I Clean Out My Fireplace?
A: You should clean out your fireplace after every use. This will help ensure that you don’t have any buildup of ash or debris that could be hazardous when burning your next fire. It’s also important to check for creosote buildup to make sure your fireplace is safe.
Q: How Do I Put Out My Fire?
A: When you’re ready to put out your fire, make sure that all of the logs are burned down completely. Then use a poker or shovel to spread out any remaining embers and ashes. Cover the fireplace with a fire screen or door to ensure that no sparks fly out of the fireplace. Finally, use your poker or shovel to cover any remaining embers with a layer of sand.
Conclusion
Knowing how to start a fire in a fireplace with Duraflame is an essential skill for any homeowner. Not only is it good for providing warmth and comfort on a cold winter’s night, but it can also be useful for things like cooking meals or safely disposing of paper or other hazardous materials.
Whether you opt to use the crumpled paper and kindling method or just light one of Duraflame’s easy-light logs, taking the time to learn this skill will certainly come in handy. Don’t forget that if you have more complex projects involving quilting, binding is an important step!
If you’re looking for your next project, consider learning how to hand stitch binding on a quilt. It’s a great way to create something beautiful and useful all at once!
